aMG CANINF 1.5

<< Click to Display Table of Contents >>

Navigation:  Hardware Modules >

aMG CANINF 1.5

Previous pageReturn to chapter overviewNext page

aMG CANINF 1.5 - DB9

amg_caninf_1_zoom25

amg_caninf_2_zoom25

amg_caninf_3_zoom25

Aimagin Store

aMG CANINF 1.5 - RJ45

amg-caninf-1_5r1_zoom25

amg-caninf-1_5r2_zoom25

amg-caninf-1_5r3_zoom21


Features

1. Texas Instrument SN65HVD230 3.3V CAN Transceiver with Standby Mode

Operates With a 3.3-V Supply
Low Power Replacement for the PCA82C250 Footprint
Bus/Pin ESD Protection Exceeds 16 kV HBM
High Input Impedance Allows for 120 Nodes on a Bus
Controlled Driver Output Transition Times for Improved
Signal Quality on the SN65HVD230 and SN65HVD231
Unpowered Node Does Not Disturb the Bus
Compatible With the Requirements of the ISO 11898 Standard
Low-Current SN65HVD230 Standby Mode 370 µA Typical
Low-Current SN65HVD231 Sleep Mode 40 nA Typical
Designed for Signaling Rates(1) up to 1 Megabit/Second (Mbps)
Thermal Shutdown Protection
Open-Circuit Fail-Safe Design
Glitch-Free Power-Up and Power-Down Protection for Hot-Plugging Applications

2. Matlab / Simulink support with Waijung Blockset

3. Power LED

4. DB-9 (aMG CANINF 1.5 - DB9) or RJ45 (aMG CANINF 1.5 - RJ45) Connector Type

5. Power over CAN BUS provision

6. RoHS

Applications

1. Motor Control

2. Industrial Automation

3. Basestation Control and Status

4. Robotics

5. Automotive

6. UPS Control

7. Sensor Network

Documentations

1. SN65HVD230 Datasheet

2. Schematic Diagram

3. PCB Layout

Demos

1. CAN BUS Standard ID

2. CAN BUS Extended ID