Features
1. Texas Instrument DP83848C Ethernet Physical Layer Transceiver
| Low-power 3.3V, 0.18µm CMOS technology |
| Low power consumption < 270mW Typical |
| Auto-MDIX for 10/100 Mb/s |
| SNI Interface (configurable) |
| RMII Rev. 1.2 Interface (configurable) |
| MII Serial Management Interface (MDC and MDIO) |
| IEEE 802.3u Auto-Negotiation and Parallel Detection |
| IEEE 802.3u ENDEC, 10BASE-T transceivers and filters |
| IEEE 802.3u PCS, 100BASE-TX transceivers and filters |
| Integrated ANSI X3.263 compliant TP-PMD physical sub-layer with adaptive equalization and Baseline Wander compensation |
| Error-free Operation up to 137 meters |
| Programmable LED support Link, 10 /100 Mb/s Mode, Activity, and Collision Detect |
| Single register access for complete PHY status |
| 10/100 Mb/s packet BIST (Built in Self Test) |
2. Selectable MII (Default) / RMII (optional - need additional 50MHz clock source) Interface
3. Plug and Play with aMG F4Connect 2
4. Matlab / Simulink support with Waijung Blockset
5. RJ45 with Integrated Magnetics and status LED
6. Power LED
7. RoHS
Applications
1. Physical Layer device for ethernet connectivity
2. Web-based monitoring and control with FiO 2 Boards.
Documentations
1. DP83848C Datasheet
2. Schematic Diagram
3. PCB Layout and Dimensions
Demos
Basic Features
1. Start webserver first page
2. Webserver CGI demo
1.Web Monitoring with W2D
2.Web Control with W2D
3.Web ADC with W2D
