Signal Conditioning Design Guidline

<< Click to Display Table of Contents >>

Navigation:  Hardware Modules > aMG SIGCON-A >

Signal Conditioning Design Guidline

 Previous pageReturn to chapter overviewNext page
1.Introduction
2.Op-Amp Parameters
3.Signal Conditioning Introduction
4.Sample Applications
a.Voltage Follower
b.Attenuation
i.Vin = 0 – 5 V, Vout = 0  – 3 V
ii.Vin = 0 – 10 V, Vout = 0 – 3 V
iii. Vin = AC 220 V (±311 V), Vout = 0 – 3 V

c. Amplification

iii.Vin = 0 – 3 V, Vout = 0 – 5 V
iii.Vin = 0 – 3 V, Vout = 0 – 12 V

d. Zero-Span

iii.Vin 0 - 20 mV, Vout 0 - 3 V
iii.Vin 0  - 3 V, Vout -12 to +12 V

e. Active Filter

5. References